|  |

| |

Enabling better global research outcomes in soil, plant & environmental monitoring.

Tensiometer - Jet Fill

A tensiometer measures the force with which water is held in the soil by the soil particles. This force, referred to as soil suction, tension, or potential, indicates how tightly the water is bound in the soil, and how much energy must be exerted by plant roots to remove and use the water. The basic components of a tensiometer include a porous ceramic cup, a plastic body tube, and a vacuum gauge. The ceramic cup is placed in good hydraulic contact with the soil and allows transfer of water into and out of the tensiometer body according to the tension in the soil. The vacuum inside the tensiometer body equilibrates with the soil water tension, and the dial gauge provides a direct readout of the tension.

Jetfill Tensiometer Features

The Model 2725AR Jet Fill Tensiometer features the Jet Fill reservoir for push-button convenience and minimisation of soil disturbance when servicing is required. Unique modular construction allows for easy replacement of the porous ceramic cup and dial gauge and adaptation of extensions for flexibility and variety in use. Series 0240 Insertion Tools can be used to core a hole to accept these units.

Select Options:

Part number and Description

  • 2725ARL06 JET FILL TENSIOMETER, 6 inch length, .76 Lbs (.34kgs)
  • 2725ARL12 JET FILL TENSIOMETER, 12 inch length, .90 Lbs (.41kgs)
  • 2725ARL18 JET FILL TENSIOMETER, 18 inch length, 1.03 Lbs (.47kgs)
  • 2725ARL24 JET FILL TENSIOMETER, 24 inch length, 1.15 Lbs (.52kgs)
  • 2725ARL36 JET FILL TENSIOMETER, 36 inch length, 1.42 Lbs (.64kgs)
  • 2725ARL48 JET FILL TENSIOMETER, 48 inch length, 1.68 Lbs (.76kgs)
  • 2725ARL60 JET FILL TENSIOMETER, 60 inch length, 1.94 Lbs (.88kgs)

Bagarello, V., Iovino, M. and Tusa, G. 2000, ‘Factors Affecting Measurement of the Near-Saturated Soil Hydraulic Conductivity‘,
Soil Science Society of America Journal, vol. 64, no.4, pp. 1203-1210.

Chen, C. and Payne, W.A. 2001, ‘Measured and Modeled Unsaturated Hydraulic Conductivity of a Walla Walla Silt Loam’,
Soil Science Society of America Journal, vol. 65,
pp. 1385-1391.

Darusman, A.H.K., Stone, L.R., Spurgeon, W.E. and Lamm, F.R. 1997, ‘Water Flux Below the Root Zone vs. Irrigation Amount in Drip-Irrigated Corn‘,
Agronomy Journal, vol. 89, pp. 375-379.

Germann, P., Helbling, A. and Vadilonga, T. 2007, ‘Rivulet Approach to Rates of PreferentialInfiltration‘,
Vadose Zone Journal, vol. 6, pp. 207-220.

Lenhard, R.J. and Meakin, P. 2007, ‘Water Behavior in Layered Porous Media with Discrete Flow Channels: Results of a Large-Scale Experiment‘,
Vadose Zone Journal, vol. 6, pp. 458-470.

Lowery, B., Datiri, B.C. and Andraski, B.J. 1986, ‘An Electrical Readout System for Tensiometers‘,
Soil Science Society of America Journal, vol. 50, no. 2, pp. 494-496.

Moroizumi, T. and Horino, H. 2004, ‘Tillage Effects on Subsurface Drainage‘, Soil Science
Society of America Journal, vol. 68, pp. 1138-1144.

Steinberg, S.L. and Poritz, D. 2005, ‘Measurement of Hydraulic Characteristics of Porous Media Used to Grow Plants in Microgravity‘, Soil Science Society of America Journal, vol. 69, pp. 301-310.

Sugita, F. and Nakane, K. 2007, ‘Combined Effects of Rainfall Patterns and Porous Media Properties on Nitrate Leaching‘, Vadose Zone Journal, vol. 6, pp. 548-553.

Toride, N., Inoue, M. and Leij, F.J. 2003, ‘Hydrodynamic Dispersion in an Unsaturated Dune Sand‘, Soil Science Society of America Journal, vol. 67, pp. 703-712.

Waddell, J.T., Gupta, S.C., Moncrief, J.F., Rosen, C.J. and Steele, D.D. 1999, ‘Irrigation and Nitrogen Management Effects on Potato Yield, Tuber Quality, and Nitrogen Uptake‘,
Agronomy Journal, vol. 91, pp. 991-997.